The Sewing Place

Alternatives to 505 adhesive?

HVM

Alternatives to 505 adhesive?
« on: April 10, 2017, 17:45:36 PM »
Does anyone have any good alternatives for 505 adhesive for temporary fixing of fabric to stabiliser when it is too thick to be hooped? 505 works well but I've found it difficult to remove from the fabric afterwards in some circumstances, even with machine washing.

maliw

Re: Alternatives to 505 adhesive?
« Reply #1 on: April 10, 2017, 19:13:37 PM »
Even if I use 505 spray I also use bent safety pins. I don't always use spray anyway.
At leisure on the leisure penninsula

Lowena

Re: Alternatives to 505 adhesive?
« Reply #2 on: April 11, 2017, 00:19:16 AM »
I always spray with 505 and then pin with quilter's safety pins too :)
Triumph of hope over experience :D

Marniesews

Re: Alternatives to 505 adhesive?
« Reply #3 on: April 11, 2017, 21:09:57 PM »
Oh dear. This so different from my experience with it but I use it for layering stretch lace onto lycra dresses when it soon dissipates as they're handled during the construction process. I'm assuming you're using cotton which is clearly bonding much more firmly.

Do you spray as light and even coverage as you can? Can you do a few light passes over the fabric without coating every square inch?
Aka Jacky F in a former life...

Morgan

Re: Alternatives to 505 adhesive?
« Reply #4 on: April 12, 2017, 00:58:47 AM »

Spray the stabiliser (lightly), not the fabric.


Use the outline tackdown (basting) feature or hand tack (baste).  It's the most economical and sometimes the most reliable method if you have problems with needles and sewing through stitcky


Try iron-on stabiliser (hoop stabiliser, place on flat pressing surface, align fabric and use craft iron to heat the fabric onto the stabiliser).


Try one of the stick-on stabilisers -
For economic use, try a piece of cutaway stabiliser with a window cut where you position the stitckyback then hoop the cutaway+sticky and press the fabric onto the sticky.
http://www.bsk.co.uk/starlite-sticky-self-adhesive-embroidery-backing-stabiliser-various-lengths--widths-2984-p.asp


or WetnStick stabiliser http://www.lordsewing.co.uk/floriani-wet-n-stick-1615-p.asp
http://www.theembroideryschool.co.uk/howtoembroidercornersofhankiescollars.html


or ordinary stabilser and doublesided tape around the outside of the stitching area to hold the fabric in place before tackdown.


http://sew-hip.livejournal.com/1984218.html


HVM

Re: Alternatives to 505 adhesive?
« Reply #5 on: April 12, 2017, 22:31:28 PM »
Thanks everyone for your ideas. I use it as sparingly as possible and always on the stabiliser. Stick on stabiliser isn't really appropriate in the particular situation I've had a problem with. It was a baby blanket which the mum wanted the baby's name embroidered on so it really needed to be tearaway. Mum has washed the blanket twice and it still has some adhesive residue. I'll give the double sided tape a try and the safety pins. The outline tack down could work in some applications. All worth trying. Thank you.