The Sewing Place
Tools of the Trade => Sewing Spaces and Furniture => Topic started by: Bodgeitandscarper on March 18, 2017, 20:12:44 PM
-
I have to cut out on the dining table and got really fed up with an aching back, so looked for a cheap and simple solution. Table/chair leg raisers were the solution, available from mobility aids type places. I got mine from ebay, only around £11 if I remember correctly.
-
I did the same with my cutting table, it has made my poor back so happy!!
-
Best I can do is take my shoes off. I use a large desk and it doesn't have that type of leg or those risers would be brilliant. I've been looking for a suitable cutting out table for a fair while, the Horn one would be great but it's just finding one at the right price and at a time when funds are flexible.
-
When our extension is built and I move the kitchen, I'm having an island unit - mainly for cutting out :D
-
That's a brilliant idea. I'm 6' tall and do have a bad back, by the time I've bent nearly double over my table laying patterns out and cutting out I've got a really bad back (arthritis in my spine). I never thought of doing that, I put a piece of 3/4" MDF on the top of mine to raise it just that little bit but it's not enough. Excuse me I'm off to ebay to see if I can find a set of those raisers. Thanks so much for the tip
-
Do you think it would work with my dining table ????
(https://lh3.googleusercontent.com/jUkQOqhlbuBs95m1OlaKAmkgDsJqY2cwQRr9yRrBfSQYhiVqkk1qN3N1j_vlz0tvo6UsAb_fwVleZatrhzCGFAEpv3zcMZFWhV2fKYeHY-Y7dH74fHccXw1WLCnf1bpOFtEgQv8ERnjM1jUkYYOb8tVq_2c8StM5nxNpeh_Z-uPETiHWUIaUlFn9kf249j9DJE809eWtCulaioB2XNwyxD2uQxF4PKl9M_Bqag0DdgR1mGy-UHwoIszSBXAUl_g2MeErQQTubybU2Kc69wp_RZDtLJSqxMK_0RSkfi5rjWv-RS0sCFz_wzlMeumfiWIkU-7pm0Ksf0OHjdkXUGu1VGIC3b-EnfWkZskD7zVG4KqJo_I8oc10SILCA4aLGgSOu9Ng0DTrGm6FDqQ2kA_m0e3Hthg9SBqj6QFm_Mjiw9XzAWrU80Zp4UgFEo7OcyPqG1nNqJ7BVpMR6o4f1lVUcDKDrgeNImpSm3HBRk7SCKFQmQd5HA3EMOP8MhD_foxQ-JsEZYUBXJrAivHkwLVKw6kyM-9A8_2rbS9fupmzllOm-II9KZKJPjrj2hdiwI_gUeu8AgDeHnH9ptdMt1ekFgQPN2H2k8qGS7Q9vXWS2uXUjaw=w477-h639-no)
Luuurve the thought of an island ....just for cutting out (and basting)
I'd have mine in the Indian ocean please!
-
Being a short arse, I don't find it's a problem. Long cutting out sessions crock knees or hip these days, not my back.
-
I've got IKEA adjustable legs ( not me literally) on my cutting out table to raise it and on my machine table to lower it. Happy back.
-
I've got IKEA adjustable legs ( not me literally) on my cutting out table to raise it and on my machine table to lower it. Happy back.
At only 5 ft I'd love adjustable legs! :P
-
I've got IKEA adjustable legs ( not me literally) on my cutting out table to raise it and on my machine table to lower it. Happy back.
They look useful, I did think about those too.
-
I have to cut out on the dining table and got really fed up with an aching back, so looked for a cheap and simple solution. Table/chair leg raisers were the solution
0_0 0_0 Your table legs look as if they are wearing hooves. Seriously backache is no joke and bending over a too low table has done for my sewing. :(