From the lovely Georgina ...
Hi Iminei,
Here are a few in progress pics of the jacket, I didnt take many somehow.
I basically designed my design onto a scaled picture of the pattern pieces, I also drew 1" grid on the paper pattern piece so I could reference and position blocks as I made them.
I made each of the pattern pieces as it's own quilted piece and then stitched them together as the pattern says. Binding the edges instead of hemming and binding the seams inside (you need to take into account hem allowance on length and sleeves that you would have on the pattern piece and remove it or your jacket will be much longer than intended, you can always try it on and cut off excess before you bind the edges).
Also with the sleeves my pattern was a two part sleeve so I made the sleeve quilt pieces with just top and batting and then constructed them and after attaching them to the body of the jacket I added a separate lining to hide seams and batting and to reduce stiffness in the sleeve.
Hope that all makes sense and helps someone somehow haha.