The Sewing Place

Foxgloves for Ed

BrendaP

Foxgloves for Ed
« on: July 14, 2018, 19:17:51 PM »
Not sure if this belongs in the dark side, the light side, or just the twilight zone.

  [ You are not allowed to view attachments ]  

At art group last week we had a talk/workshop "Towards Abstraction".  After the initial discussions the tutor set out some randm objects, including a vase of foxgloves, for us to work from.  All I managed were a couple of very rough sketches, but all the time I was seeing it as a textile piece rather than a painting.

A few weeks ago we sadly lost one of our members, and his brother had given all of his paints, brushes and other art stuff to the group to share out.  The stash included some rolls of transfer foil, and as there were only two of us who even knew what it was Kathleen and I took half each.  I also received a hot glue gun and a few marker pens.

I wanted to use some of that foil from Ed in my foxglove picture and this is what I've managed so far; and everything from stash!

Navy blue poly cotton supported by heavy dressmaking interfacing for the background.

The vase is a bit of really shiny holographic metallicy fabric, appliqued and topstitched using Husqvarna 'Vera'

The flowers are pink foil applied to polycotton with bondaweb then cut into small pieces and Pritt stick to keep them in place.

I originally thought to machine applique them down but the test bits were unsuccessful, they kept moving, so a layer of very fine organza over the lot and free motion squiggles over everything except the vase using the Featherweight.

Random straight hand stitches in a variety of greens for the stems.

Seed beads stitched over the petals.

The leaves at the bottom are cut from a layer of green organza fused with bondaweb to another very shiny, metallicy green fabric and machine stitched down just along the centre rib.

I think it's finished except for mounting/faming.  I can't decide whether to fuse a second layer of heavy interfacing to the back and then bind it and finish it as a wall hanging or to stick it to a board and get a wooden picture frame made to fit.  The finished picture will be 24" x 14".

It's not ever so abstract, but it's not particularly realistic either.
« Last Edit: July 14, 2018, 19:19:33 PM by BrendaP »
Brenda.  My machines are: Corona, a 1953 Singer 201K-3, Caroline, a 1940 Singer 201K-3, Thirza, 1949 Singer 221K, Azilia, 1957 Singer 201K-MK2 and Vera, a Husqvarna 350 SewEasy about 20 years old. Also Bernina 1150 overlocker and Elna 444 Coverstitcher.
http://paternoster.orpheusweb.co.

fajita

Re: Foxgloves for Ed
« Reply #1 on: July 14, 2018, 19:30:35 PM »
That's lovely, Brenda.

So nice you could make use of those materials.


Bodgeitandscarper

Re: Foxgloves for Ed
« Reply #2 on: July 15, 2018, 09:05:22 AM »
Gosh, that's clever!  I think I'd frame it. 

BrendaP

Re: Foxgloves for Ed
« Reply #3 on: July 15, 2018, 10:43:37 AM »
I'm starting to think frame rather than wall hanging.  The embroidery and beads are making one side wrinkle and flute a bit.  I think it will be easier to stretch out over a backing board than to try and get it to lie flat as a wll hanging. 

Terry suggested frame too because it would keep it cleaner, but only if there's glass in front, and I don't want that!
Brenda.  My machines are: Corona, a 1953 Singer 201K-3, Caroline, a 1940 Singer 201K-3, Thirza, 1949 Singer 221K, Azilia, 1957 Singer 201K-MK2 and Vera, a Husqvarna 350 SewEasy about 20 years old. Also Bernina 1150 overlocker and Elna 444 Coverstitcher.
http://paternoster.orpheusweb.co.

Kenora

Re: Foxgloves for Ed
« Reply #4 on: July 15, 2018, 19:26:07 PM »
Wow, you have a lot of patience @BrendaP - it's a great piece of interpretation and deserves to be in a frame - with or without glass. It's something that needs to be studied closely, as there is so much detail in it, so you are probably right not to want glass. Beautiful work.  <3
Minding my P's & Q's in Portreath

Bodgeitandscarper

Re: Foxgloves for Ed
« Reply #5 on: July 15, 2018, 19:27:45 PM »
I was thinking a frame but no glass too.

Iminei

Re: Foxgloves for Ed
« Reply #6 on: July 16, 2018, 07:40:13 AM »
Its wonderful Brenda and I look forward to seeing your creation in our next Darkside Challenge, coming to you at a Darkside near you, mid August!
The Imperfect Perfectionist sews again

Sheilago

Re: Foxgloves for Ed
« Reply #7 on: July 16, 2018, 08:55:06 AM »
That’s lovely, Brenda. I think you can get non reflective glass or Perspex for needlework . I’d ask a framer what they advise.

rubywishes

Re: Foxgloves for Ed
« Reply #8 on: July 19, 2018, 12:16:49 PM »
That's lovely. 0_0
Juki TL2010Q, Juki DX7,  Singers: 1917 27K treadle (aka Gertie), 1957 99k (aka Vincent), 1951 99k knee lever (aka Shirley), 1950 99k handcrank (aka Alice), 1927 28K (aka Dora), 1947 201K treadle with motor conversion (aka Livvy)
....and the dusting and vacuming can wait!

BrendaP

Re: Foxgloves for Ed
« Reply #9 on: October 14, 2018, 12:04:27 PM »
Here's the framed picture - it's without glass.
  [ You are not allowed to view attachments ]  
Brenda.  My machines are: Corona, a 1953 Singer 201K-3, Caroline, a 1940 Singer 201K-3, Thirza, 1949 Singer 221K, Azilia, 1957 Singer 201K-MK2 and Vera, a Husqvarna 350 SewEasy about 20 years old. Also Bernina 1150 overlocker and Elna 444 Coverstitcher.
http://paternoster.orpheusweb.co.

Lowena

Re: Foxgloves for Ed
« Reply #10 on: October 14, 2018, 12:05:06 PM »
Lovely
Triumph of hope over experience :D

Greybird

Re: Foxgloves for Ed
« Reply #11 on: October 14, 2018, 12:17:39 PM »
That's beautiful @BrendaP !

Ellabella

Re: Foxgloves for Ed
« Reply #12 on: October 14, 2018, 13:54:59 PM »
Love the butterflies @BrendaP, they really set it off beautifully.

SkoutSews

Re: Foxgloves for Ed
« Reply #13 on: October 14, 2018, 16:30:42 PM »
Beautiful work. The frame sets it off well. Good decision not to use glass, which would hide texture and detail.

Iminei

Re: Foxgloves for Ed
« Reply #14 on: October 14, 2018, 16:38:20 PM »
Beautiful Brenda, as always!
The Imperfect Perfectionist sews again