Hi all
Here’s the infamous USA pink jetsons style atomic buttonholer for slant shank Singer sewing machines. These don’t fit a 301 but should fit 401s+ if you’re not sure your machine is a slant shank let me know and we’ll work it out. This will not fit a low/straight shank.
It’s been cleaned, regreased and lubed. Tested and is following the template beautifully on my 500a.
It has, the device, the manual, the feed cover (not necessary as you can raise the plate or drop the dogs) and extra thumb screw to attach it to the shank, 9 templates (below no eyelet template) and the iconic pink case.
15/16 straight
5/8 straight
3/8 straight
1/2 straight
13/16 straight
1/16 straight
5/8 keyhole
1 1/16 straight
1 1/16 keyhole
To be fair you don’t need a buttonholer on a slant-shank but they do make consistency much easier once you get the tensions right. The atomic ones are extra stylish!
Helen usually sells these at 40 without extra templates I’m thinking 30 including UK postage if you’re interested drop me a PM
Any questions please ask
Thank you