The Sewing Place

Buttonhole foot - hate it!

BrendaP

Re: Buttonhole foot - hate it!
« Reply #15 on: June 27, 2019, 18:58:01 PM »
Most problems with the quality and consistency of buttonholes can be associated with the the feed of the fabric because the long buttonhole foot is not completely level at all times. Even a slight bump from stitching or a piece of seam allowance can tilt the foot and reduce the traction of the feed dogs.

That's why the vintage buttonholers work well.  Lower the foot lever with a snap and the whole of the fabric is held securely and moves with the attachment rather than the foot moving over the fabric.
Brenda.  My machines are: Caroline a Singer 201K-3 born 1940, Thirza a Featherweight 221K born 1949, Azilia a Singer 201K born 1957 and Vera, a Husqvarna 350 SewEasy about 20 years old. Also Bernina 1150 overlocker and Elna 444 Coverstitcher.
http://paternoster.orpheusweb.co.uk/

Sheilago

Re: Buttonhole foot - hate it!
« Reply #16 on: June 29, 2019, 08:58:27 AM »
Yes @WildAtlanticWay, that’s what I resorted to doing: which was how I was taught at school,back in the days when boys did woodwork and girls did fabric and fashion  :o

Pleased to see that this discussion has helped others with this problem too.