The Sewing Place

Okaaayyy... maybe I need an overlocker...

wrenkins

Re: Okaaayyy... maybe I need an overlocker...
« Reply #135 on: June 13, 2019, 21:08:24 PM »
Thankfully @Elnnina the pin didn't break and I was able to pull it out. I'm obviously doing something dopey. It was all bunching up and sewing on top of itself. I really need to sit down with the manual and stop irritating myself. There is a strong possibility that I forgot to put the presser foot down but I can't be sure. (I'm afraid I'm not long on patience  :( ).
The fabric I was using is quite thin so I'll have to check my tension properly.
(whispers...I don't even know what the things on the side do it's so long since I read the book.  :| ). Big stitches, wee stitches, big gaps, wee gaps....blah blah blah!  0_0
I have ordered some really nice fabric and I don't want to make a mess of it so I'll be a good girl and do some studying.  ;)
Fashion fades, style is forever!

Acorn

Re: Okaaayyy... maybe I need an overlocker...
« Reply #136 on: June 13, 2019, 21:25:07 PM »
I can tell you that leaving the presser foot up does have exactly that effect! 
I might look as though I'm talking to you, but inside my head I'm sewing.

wrenkins

Re: Okaaayyy... maybe I need an overlocker...
« Reply #137 on: June 13, 2019, 21:44:17 PM »
0_0  0_0  0_0
Fashion fades, style is forever!

annieeg

Re: Okaaayyy... maybe I need an overlocker...
« Reply #138 on: June 14, 2019, 09:33:21 AM »
I've been overlocking for years and I continue to fall in and out of love with it!
It works fine - then goes wrong (my operator error!) - then I push it away in disgust and it lies idle for a long time until I get up the energy to try it again.
I usually talk to it, negotiate with it, ask it to behave and cooperate, and then try again...
The second-to-last time I tried to use it I dropped it!!! and had to test/check it all over to see if it was ok, but it seemed to have survived.
The last time I used it, I stitched over a pin and broke the blade!! >< :o
Have now replaced the blade and will re-read the manual (yet again).   
I am truly intimidated by the overlocker! :ninja:

Greybird

Re: Okaaayyy... maybe I need an overlocker...
« Reply #139 on: June 14, 2019, 09:56:00 AM »
I would like to know who is the patron saint of overlockers. I need to know that I am praying to the right entity, every time I sit down at it, that I am not going to have to re-thread it this time.

wrenkins

Re: Okaaayyy... maybe I need an overlocker...
« Reply #140 on: June 14, 2019, 11:02:19 AM »
Probably won't go far wrong with St Clare @Greybird. She's needlework isn't she? I'll just have to negotiate some patience with her.  :S
I don't know if intimidated is the right word @annieeg but it certainly makes me stop and think. My interactions tend to start with..'right, come on now' but I'm not sure if that's geeing myself up or warning my OL not to start any nonsense with me (knowing fine well that it will win  :[).  0_0
Fashion fades, style is forever!

jintie

Re: Okaaayyy... maybe I need an overlocker...
« Reply #141 on: June 14, 2019, 12:09:43 PM »
If computers needed so much human intervention,  they wouldn't be so popular.

Helen M

Re: Okaaayyy... maybe I need an overlocker...
« Reply #142 on: June 14, 2019, 12:13:35 PM »
I can only thank whoever is the patron saint of overlockers for guiding me to my Brother Lock 730D back in 1989 (yikes)! I can honestly say I've rarely had to re thread (I can do it in no time thanks to Brother's easy U looper thingy) due to a breakage and took to it like a duck to water. Granted it is only 3 thread so seams get done before, or on some knits the 3 thread stitch is enough.

There weren't that many around back in those day and my choice was between a 4 thread Janome, with no differential feed, and the Brother 3 or 4 which had the Diff. I spent many lunchtimes trudging between Lewis's and Kendals in Manchester (they were not close together....). There was a difference of £100 in price between the 3 and 4 thread Brother and as I was expecting to use it mainly for edges of hems and other seams I went with the 3 and have never looked back. A couple of years ago it started to play up on heavy fabrics. I changed the blades and it was okay but it started playing up again so I decided to go for the 2104D in case the other gave up. I wish I'd gone for a 1034D as I don't like the LED lighting, the other is much brighter. I still use the old Brother most of the time and it purrs along.

I keep meaning to get it serviced at Bambers, he said there isn't much that can go wrong and helped me when I changed the blades. I just oil it as instructed. The only needles I have broken were 2, in fairly quick succession, Janome blue tip which it obviously dislikes. I don't pin but am a fan of tacking (on everything I'll confess) as I feel I can get a better run and take it slowly if it's a tricky fabric.
Stash Busting 2019
Goal: 30 metres
So far: 5m metres

Morgan

Re: Okaaayyy... maybe I need an overlocker...
« Reply #143 on: June 14, 2019, 12:21:49 PM »
Suggestion for the wary, frustrated, want to do better, etc.   -
How about joining together and support each other to build up your own Samples & Settings folder as you try and practise the exercises in this workbook - eg. 1 chapter per week.
The exercises can be done on any overlocker, so don't be put off that your machine is not the make or model in the workbook.  Just have your manual handy.

Workbook Exercises for overlocker (& coverstitch)

It takes you through step by step and builds up your understanding and confidence.
By working on exercises instead of projects, you have permission to get it wonky.  You have to make things wonky so you can get the hang of adjusting the different settings to get the result you want.
The idea is you - Use different coloured threads, Try the exercise, practise, deliberately get it wrong and become confident in troubleshooting and fixing, then make samples on the fabrics types you work with and record the settings for your machine.

If you want to watch the videos that demonstrate the exercises in the workbook - see these videos here (Page 2 has the extra techniques eg. quilt as you go).  The focus is on the 1150MDA but much of the information and techniques is transferrable to other makes and models.

Alternatively here is a useful collection of Beginner Serger Tutorials (just get past the 'perky' voice).  It's like a course.  There are other collections, quite a good one is by an Australian and I think Jessie gave some links to those a while ago.


And, as the Brother 1034D has a different tension disk open/close system compared with other machines, this video shows how it's important to use the tension release buttons on the top of each thread path when threading.
On other machines, lift the presser foot to release/open the tension disks for threading.

So how about you band together into a sew-along type group and do the exercises?

wrenkins

Re: Okaaayyy... maybe I need an overlocker...
« Reply #144 on: June 14, 2019, 12:45:03 PM »
That's the workbook I downloaded and suggested to @Acorn a couple of pages ago. It looks good but so far mine is full of good intentions. So far I've sewn a total of about 5m :S
Fashion fades, style is forever!

Acorn

Re: Okaaayyy... maybe I need an overlocker...
« Reply #145 on: June 14, 2019, 13:34:54 PM »
Yes, I have that workbook downloaded and saved.  I haven't used it so far because I decided it was best to familiarise myself with my machine before trying to translate Bernina!  I do have a set of samples of the various types of seam and hem from my own manual, done in the four colours that match the colours on the machine for future reference, properly annotated on the fabric.

We (Lucy and I) have just made a t-shirt (Blank Slate Blanc T-shirt) - overlocked seams, and overlocked edges, then twin needle hemmed with my normal machine.  I would usually put a neckband on, but the cotton jersey I used has almost no stretch, so that wasn't going to work, and so I hemmed the neck.

Anyway, it has superb seams, and the hemming is much, much neater with the overlocked edges.  Unfortunately the twin needle stitching tunneled moderately badly, and even skipped a few stitches.  But that is a story for a different place, and one that I know has pretty much no solution.  It's a lot better now I've pressed it anyway.

So, TL;DR - delighted with the overlockers performance in making a t-shirt.
I might look as though I'm talking to you, but inside my head I'm sewing.

Ploshkin

Re: Okaaayyy... maybe I need an overlocker...
« Reply #146 on: June 14, 2019, 13:50:41 PM »
I must be very lucky.  I get my overlocker out, thread it with whatever colour I need, do a test seam on my fabric, (rarely need to adjust the tension or differential feed) use it and put it away again.  I've never had an issue with it.
Life's too short for ironing.

Acorn

Re: Okaaayyy... maybe I need an overlocker...
« Reply #147 on: June 14, 2019, 13:56:28 PM »
I'm sincerely hoping that mine's heading that way too @Ploshkin - so far so good anyway.
I might look as though I'm talking to you, but inside my head I'm sewing.

Nevis5

Re: Okaaayyy... maybe I need an overlocker...
« Reply #148 on: June 14, 2019, 14:28:12 PM »
Must admit that my overlocker is like yours, too, @Ploshkin .  It's been great (apart from the pin incident which was hardly its fault).  I have a Babylock Imagine which I bought a few years ago - the first one I had was an Elna which was a bit more tricky to thread and get the tension right. I'm spoilt by the Babylock as all that stuff is pretty automatic  <3

Wouldn't be without mine. xx

Acorn

Re: Okaaayyy... maybe I need an overlocker...
« Reply #149 on: June 14, 2019, 14:36:03 PM »
Having had such an easy time with the overlocking bit of my t-shirt, and then the usual trouble with my other machine's twin needle, I'm wondering about a coverlocker... I've found somewhere that appears to have the Britannia one in stock.  @Sewbusy - is yours this one - the CS4000? 

I might look as though I'm talking to you, but inside my head I'm sewing.