The Sewing Place
Machine Talk => Sewing Machines => Topic started by: annieeg on June 14, 2019, 19:04:49 PM
-
I'm struggling with some very faulty machining which is caused by the bobbin (I.e., it's the underside). The underside of the stitching is about 0.3 cm loose from the needle side.
Would anyone know what might be causing this?
I'll try and post a photo later.
Annie
-
If the problem is showing underneath it is usually the top thread that is causing a problem, try unthreading and threading again and check the tension.
Hope this helps
-
@Celia
Thank you -I'm mortified to say it didn't occur to me to check tension :ninja:
I'll do that and report updates.
-
Here's a photo of the stitching issue.
[ You are not allowed to view attachments ]
-
@annieeg I wonder if there is lint around the bobbin case, I had that happen a few days ago so cleaned out the feed dogs and bobbin case, checked tension on bobbin and upper thread. It worked well after that. :vintage:
-
@Lilian thanks for the suggestion and I wl check that out.