The Sewing Place
The Emporia => In the wardrobe => Technical Help => Topic started by: Pearl on June 24, 2018, 10:50:26 AM
-
I am a funny
shape size whereby I am a 12 on top and 14 below (fat thighs :|). Yesterday I bought a size 14 dress which fits okay when I'm standing up but when I sit down, the front gapes. I wondered if there is anything I could do to solve this problem (with limited skills).
-
I've done little modesty panel things before with this problem....sort of a triangle shape piece of fabric, doubled, to fill in the gap...say two/three inches or so. I was able to just stitch it on the back of the gap to fill it in.
You'd need to find some suitable fabric...or maybe some lace? Does it have pockets you could sacrifice?
Sandra.
-
Thanks, @Sandra . No, no pockets. Also, it has a zip up the front.
-
Oh! A zip.....erm... :[
The little modesty piece attached firmly on the one side and attached with a press-stud on the other?
Sandra.
xxx
-
@Pearl: the person who took the photo was standing above you. Anyone sitting opposite you won't get the same view. I have a number of lace edged vest tops (https://www.jcrew.com/s7-img-facade/H1836_PK6603_m?fmt=jpeg) for coverage.
-
Thanks, @UttaRetch . My main concern was really modesty; it's more that it doesn't fit properly.
-
Would taking in at the shoulder seams help? Maybe angle it from nothing at the sleeve to about 1cm at the neck.
-
So, @BrendaP , can I just sew the seam from the top of the sleeve to the neck edge, increasing the seam allowance as I go without having to cut or undo anything? I think that would be a solution if it's possible.
-
I think this is what Brenda is suggesting.
-
I've undone the shoulder seams and the interfacing! :S :S :S Is the cold shoulder look still fashionable?
-
Do you mean you have undone the shoulder seams and pulled the interfacing off :o or do you mean you have undone the shoulder seam between the front and back and undone the seam in the facing?
I hope it's the latter! If so that's what I meant, just resew those seams, starting in the same place next to the sleeves and gradually make the seam allowances bigger until you get to the neck edge and continue across the seam in the facings to match. Turn it all back as it should be and press.
Done!
-
I've undone the shoulder seams, the seam join the back and front interfacing and part of the seam that joined the interfacing to the dress. I'm now tacking it back together, nervously.
-
I think you are doing it right, but using the wrong terms!
interfacing is the stuff which supports/stiffens fabric, vilene is a well known brand.
A facing is the piece of fabric, usually 2-3 inches wide, cut to the same shape as the neck opening and seamed to the main garment then turned to the inside to give a clean finish.
A lot of facings are supported with iron-on interfacing aka vilene.
-
Nothing to add here other than DH would say, that's a nice view, why spoil it. ;)
-
Oh I say @Pearl!!!! :o
Get you! :ninja: :snip:
-
I think you are doing it right, but using the wrong terms!
Ah, yes, facing - that's what I undid. :D
Thanks, @BrendaP , @Sandra and @UttaRetch for your help. It's all back together now and a much better fit.
Nothing to add here other than DH would say, that's a nice view, why spoil it. ;)
>< >< :D
@wrenkins , fancy meeting you here.
-
Can't bear to miss anything @Pearl. 0_0
-
It's taken me all afternoon to make this adjustment. Mr P said, "It's a good job you're not making a dress." ><
He'll be sorry when I have a whole new wardrobe of homemade clothes, @wrenkins .
-
That's my goal. To make a dress. :)
Just imagine. :frock: <3
-
It's all back together now and a much better fit.
There you go, it wasn't that scary was it! Unpicking is the hardest bit about any alteration.
We'll soon have you making :frock: :frock: :frock:
-
You are not a funny shape, you are a British shape! Many of us are a size larger in the hip than in the bust!
I just put a wee vest top on underneath, that saves a lot of hassle. Uniqlo used to do some light weight wicking tops which are perfect ...
-
Okay, so I'm at it again.
I've bought a "peasant" skirt at the car boot this morning. It is a size 18 but was too beautiful to remain unbought. It has a zip at one side. I need to take it in. Please help!
-
Any chance of a picture of the skirt please as that would help?
lizzy
-
I tried to find one online but, no luck. Here you go.
-
Lovely fabric.
Thanks for the pic, yes I wanted to see a pic of the skirt you wanted to alter rather than a pic of one online.
Is it lined? Does it have two side seams and a back seam or just two side seams as you said there was a size zip in the skirt? If it's not lined and has two side seams only (with zip) then I would proceed as follows-
On a normal size chart the difference between RTW from a size 16 to a size 18 appears to be 3 inches at the waist and 3 inches at the hips? Is that what you were thinking of reducing it by i.e. one and a half inches on each side, if there are just two side seams in the skirt?
If so, you will need to unpick both side seams and zip and reinsert the zip and side seams? It looks as if the waist has a facing to it? If so, you would need to unpick it only at the seams rather than take all the waist facing off.
size 16 33 85 43 108.5
size 18 36 92.5 46 116
-
Thanks, @Lizzy777 . :flower: :flower: :flower:
It just has two side seams.
If so, you will need to unpick both side seams and zip and reinsert the zip and side seams? It looks as if the waist has a facing to it? If so, you would need to unpick it only at the seams rather than take all the waist facing off.
I was hoping to avoid unpicking and reinserting the zip. Think this is a bit beyond me, but nothing ventured...
-
Oh I just realised that I am assuming you want to reduce by one dress size. i.e size 18 to size 16?
The best way to measure the amount you need to reduce it by, is putting the skirt on inside out and getting someone to pin at the seams to see how much it needs to go in by. If you haven't got anyone to hep then you can always tack the difference down the seams and try it on and see how it looks.
-
Thanks, @Lizzy777 . :flower: :flower: :flower:
It just has two side seams.
I was hoping to avoid unpicking and reinserting the zip. Think this is a bit beyond me, but nothing ventured...
Yes, I realised you may have not wanted to reinsert the zip. I can't see a neater way of doing that though as it just wouldn't look right without unpicking and reinserting the zip. I am presuming it is an invisible zip? They're not that difficult to insert at all even if you haven't done one before?
We can all gently guide you through step by step on reinserting the zip. Its just fear of the unknown and once you have done it you will wonder why you were scarfed of it before. :)
n.b. When unpicking the zip I would unpick it whilst the zip is closed. Also, check the zip is working ok too before you reinsert it.
-
Is the front the same as the back?
Is the yoke part shaped?
If the answers are Yes and No you will probably be able to do all of the alteration on the right hand side and not need to touch the zip at all.
Another option would be to add a centre back seam. That will move the side seams towards the back but if you are only going down one dress size, 2" that would mean a 1" tuck/seam down the back and the side seams will move just 1/2" towards the back. Barely noticeable in wear.
-
As it is not a fitted or shaped skirt could you get away with just taking out the excess on the side seam without the zip. So long as the end result is symmetrical, which you could achieve by folding in half vertically and following the same line for the seam as the side with the zip, it should look ok.
-
I think Pearl wants to drop down two sizes i.e. from size 18 to size 14 . I think I incorrectly assumed it was one dress size so there is quite a reduction if it is todays sizing and is not a vintage skirt?
size 14 31 80 41 103.5
size 16 33 85 43 108.5
size 18 36 92.5 46 116
So that by my reckoning is 5 inches (two and a half inches each side?).
lizzy
-
Is the front the same as the back?
Is the yoke part shaped?
As far as I can tell and no. I've started to undo the side seam without the zip and am hoping to make all the adjustments on one side. Fingers crossed.
Thanks, all.
-
Good plan. Always go for the easy option. It's quite a busy pattern so should be fine. Nice fabric!
-
As far as I can tell and no. I've started to undo the side seam without the zip and am hoping to make all the adjustments on one side. Fingers crossed.
Thanks, all.
Hope it all works out smoothly for you Pearl, and you can enjoy wearing it soon. :)
lizzy